They are linux based. Use ethtool <interface>
Regards Michael Baird > I have a BulletM2 and a NanostationM5 back to back (the bullet's ethernet > port is connected to the NanostationM5's "secondary" port. The NanostationM5 > is doing POE pass through and powering the BulletM2. The NanostationM5 the > BulletM2 is connected to is the far end of a pair of NanostationM5's acting > as a backhaul. > > I've had some intermittent problems on the network and I wanted to rule out a > flaky ethernet cable or connection so I decided to disable auto negotiate on > the ethernet port and to force 100Mbps full duplex to see if the problem > could be exacerbated to help locate it. When I force the BulletM2 and > NanostationM5 to 100Mbps full duplex connectivity between them is lost. I > thought "good, I've got a bad cable" so I replaced the cable. Still no good. > Tried another. Still no good. The units are close together and connected > together with a 6' cable. After trying various cables I still can't get > forced 100Mbps full duplex to work. With 100Mbps full dup forced there is no > connectivity, not even ping. > > If I revert to auto negotiate they connect fine. > > I'm assuming they are connecting at 100Mbps and probably full duplex because > if I run a speed test from the BulletM2 to the far NanostationM5 (data path > is from the BulletM2 through the ethernet cable to the close NanostationM5, > then across the wireless connection (AirMax, no ptp ack) to the far > NanostationM5) I'm seeing speeds of 95Mbps both directions with a combined > speed of double that so it seems like things are running very well in both > directions simultaneously. > > Is there any way through SSH or scripting to get the UBNT gear to report what > speed has been negotiated on the ethernet port using auto negociate? > > Could this be a bug in the firmware? > > Thanks! > Greg > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
