Here is a good one! I have a short "link" of about 3 miles from my main tower to another. On the main tower I have four UBNT 5G-20-90's with RockeyM5's running firmware 5.2. All have performed very well since I installed them earlier this year. On the other end at the problem tower I have a 26Db grid with a BulletM5 also running fw5.2. The link was doing well until two days ago. Then, the latency went through the roof. I assumed it was the radio but after switching it out twice, I decided to blame the antenna. So, I swapped out the grids multiple times. Then decided to try a Nanostation, and a Nanobridge but got worse results. I'd blame the sector on the main tower but another link on it remains working well. There is a topology difference between the working link and the poor link with the later being higher. There is some noise in the area but not unusual. What I do note is that the main tower does not "see" the far end very well (-78) and it should really be much higher. The receive rate is only 6.5Mbps.
At any rate, I've got about 3 dozen subs on this tower and worked on it until 5am so I'm ready for some fresh input! Thanks in advance! -RickG -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
