Hi all I was wondering if directly connecting two wireless cards would burn them. The point is not the power sent by the two cards, but if the impedance is not the right one.
Indeed in the "normal use" with the antenna the impedance is not the same of using a direct cable from one card to another. Not sure what impedance the "RX" card would show to the "TX" card Any idea? I am quite curious. Anybody using this configuration in daily installations? Thank you -- Ing. Paolo Di Francesco Teleinform s.r.l. Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale (Palermo) Tel: +39-091-6408576, +39-091-6404501 Fax: +39-091-6406200 http://www.wikitel.it http://www.teleinform.com -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/