It should all be 50 ohms, but you would need a big attenuator inline. Cameron
On Mon, Aug 30, 2010 at 3:50 PM, Paolo Di Francesco < paolo.difrance...@teleinform.com> wrote: > Hi all > > I was wondering if directly connecting two wireless cards would burn > them. The point is not the power sent by the two cards, but if the > impedance is not the right one. > > Indeed in the "normal use" with the antenna the impedance is not the > same of using a direct cable from one card to another. Not sure what > impedance the "RX" card would show to the "TX" card > > Any idea? I am quite curious. Anybody using this configuration in daily > installations? > > Thank you > > > -- > > > Ing. Paolo Di Francesco > > Teleinform s.r.l. > Sede Legale: Via Francesco Paolo Di Blasi 1, 90144 Palermo > Unita' Operativa: Via Regione Siciliana 49, 90046 Monreale (Palermo) > Tel: +39-091-6408576, +39-091-6404501 > Fax: +39-091-6406200 > > http://www.wikitel.it > http://www.teleinform.com > > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/