On Fri, Sep 3, 2010 at 10:35 AM, Bob Moldashel <lakel...@gbcx.net> wrote: > Eric, > > The BER issue is probably killing you. It could be the result of a > cable issue, feed horn, interference, bad receiver, bad transmitter. If > the radio is stuck at 16 QAM then you are probably getting the > appropriate throughput for that modulation. > > You should be able to do higher modulation with a -57 dB RSL. Did you > try swapping polarity on the antennas? Is the RSL symetrical on both > sides? 18.5 miles of 5.8 GHz and you are probably seeing some junk > somewhere that is messing with your stream. > > -B-
The antenna's are dual polarity so that is not an option unless I just swap the transmit and receive cables. The RSL is the same on both ends. -- ========= Eric Merkel ejmerkel.li...@gmail.com -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/