On 12/18/2010 08:45 PM, Scott Reed wrote: > 917 and 922 same results. > Nothing else on 900, except another one of our towers. No confict. > Noise floor high 90s or better. > > Yeah, I wondered about a 900MHz phone, but it works during the day > and not an night. try the two lower channels. what channel size are you using? Does the customer have a 2.4gHz wireless router? Is this pattern totally reproducible? I.e. what time does it start and what time does it stop?
Leon > > On 12/18/2010 6:35 PM, Leon D. Zetekoff wrote: >> On 12/18/2010 06:28 PM, Scott Reed wrote: >>> I have a new customer that is giving us fits. >>> AP and CPE are both RouterOS with SR9. >>> 11 Clients on the AP, this is the only one with problems. >>> I checked it several times today and it was running signal strength -65 >>> both ways and CCQ was always above 90, often saw 100. Customer said >>> the >>> performance was great. >>> I called at dusk to say it quit working. It did not work over night >>> last night, either. It will now connect with signals in the mid-60s >>> and >>> CCQ in the 70s. Never stays linked more than 15 seconds. Takes >>> about 2 >>> seconds for it to come back. >>> The rest of the client radios are staying connected just fine. Signals >>> from -56 to -72. CCQs are all 75+ when there is traffic on the link. >>> Any suggestions? >>> >> what freq is this on? what size channels? Noise floor? HAve you tried to >> do a freq scan to see if there's anything interfering. Did you try >> changing channels? It could be related to something at the CPE location. >> >> Leon >> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
