Extensive data loss means that you have tried to resend wireless frames, though the hw-retries, and its failed 3 times sequentially. On top of that you are already at the lowest data rate, therefore it disconnects due to extensive data loss.
----------------------------------------------------------- Dennis Burgess, Mikrotik Certified Trainer Link Technologies, Inc -- Mikrotik & WISP Support Services Office: 314-735-0270 Website: http://www.linktechs.net <http://www.linktechs.net/> LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com/> - Author of "Learn RouterOS" <http://routerosbook.com/> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Eric Roth Sent: Thursday, October 06, 2011 1:30 PM To: 'WISPA General List' Cc: supp...@webjogger.net Subject: [WISPA] mikrotik issue. I have a RB411 that continuously gets disconnected from the access unit with the following message in the log. It happens every couple of minutes. disconnected, extensive data loss. Has anyone seen this before and have any suggestions on how to fix it? The signal strength is -64db and the client has an 18db gain yagi antenna. The cell is running n-stream and configured for 802.11b. Thanks --Eric Roth Technology Specialist Webjogger Internet Services (845) 757-4000 www.webjogger.net
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/