Green is connected. Red means they are configured to be and once were, but are down (the radio isn't phoning the server).
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 19, 2011 at 12:48 PM, ~NGL~ <n...@ngl.net> wrote: > What are the Green and Red ? I have never seen them. > NGL > > -------------------------------------------------- > From: "Patrick D. Nix, Jr" <pni...@cnetworksolutions.com> > Sent: Wednesday, October 19, 2011 9:01 AM > To: "WISPA General List" <wireless@wispa.org> > Subject: Re: [WISPA] Aircontrol for UBNT > >> :) right, I am able to discover the devices, do firmware updates, but rssi >> is not visible and the device shows up red, unless I do a rebuild in which >> case it goes green until the services on the BMU are started and then goes >> red again. I am on a routed network OSPF my devices are private subnet >> but route-able from the AirControl server. i.e. I can ping, ssh, web >> connect to the radios from the aircontrol running on CentOS btw. >> >> Patrick Nix, Jr., >> Computer Network Solutions >> CSWEB.NET Internet Services >> IT Manager >> http://www.cnetworksolutions.com >> http://www.csweb.net >> (918) 235-0414 >> >> >> Attention: This e-mail and any attachments may contain confidential and >> privileged information. If you are not the intended recipient, please >> notify the sender immediately by return e-mail, delete this e-mail and >> destroy any copies. Any dissemination or use of this information by a >> person other than the intended recipient is unauthorized and may be >> illegal. >> >> >> -----Original Message----- >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >> Behalf Of Josh Luthman >> Sent: Wednesday, October 19, 2011 10:51 AM >> To: WISPA General List >> Subject: Re: [WISPA] Aircontrol for UBNT >> >> Too many Air products. >> >> If you're doing a broadcast discovery they need to be in the same >> collision domain, same interface of the router, etc. I expect you're >> probably trying that and they are on a different collision domain so >> what you do is add an IP range in the scan box (ie 10.10.10.0/24 and >> 172.16.2.0/24 and 192.168.233.0/24) >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Wed, Oct 19, 2011 at 11:48 AM, Patrick D. Nix, Jr >> <pni...@cnetworksolutions.com> wrote: >>> Cameras? No cameras, just managing the APs and CPEs. All of my APs are >>> added as infrastructure already, still not working. Are there any >>> additional ports that need to be open to establish communication? >>> >>> Patrick Nix, Jr., >>> Computer Network Solutions >>> CSWEB.NET Internet Services >>> IT Manager >>> http://www.cnetworksolutions.com >>> http://www.csweb.net >>> (918) 235-0414 >>> >>> >>> Attention: This e-mail and any attachments may contain confidential and >>> privileged information. If you are not the intended recipient, please >>> notify the sender immediately by return e-mail, delete this e-mail and >>> destroy any copies. Any dissemination or use of this information by a >>> person other than the intended recipient is unauthorized and may be >>> illegal. >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Josh Luthman >>> Sent: Wednesday, October 19, 2011 10:41 AM >>> To: WISPA General List >>> Subject: Re: [WISPA] Aircontrol for UBNT >>> >>> Just add the cameras as infrastructure. It's the easiest way and best >>> way (it's documented!!!) >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> On Wed, Oct 19, 2011 at 11:39 AM, Patrick D. Nix, Jr >>> <pni...@cnetworksolutions.com> wrote: >>>> Having trouble establishing communication to radios via aircontrol. It >>>> is >>>> definitely an issue with our firewall (using a imagestream rebel running >>>> iptables via powercode) because when I initiate a rebuild the >>>> communication >>>> comes up after the services process it goes down again. I already have >>>> port >>>> 22 and port 9080 open. Any ideas? >>>> >>>> >>>> >>>> Pat >>>> >>>> >>>> >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/