That seems like you're asking for trouble. I wouldn't masquerade between the AirControl server and the radios themselves - that is a ton of overhead.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 19, 2011 at 12:17 PM, Ryan Spott <rsp...@irongoat.net> wrote: > Admin Tab -> System Settings -> Air Control Server Address > Make sure this is an IP address. If not then your CPE will fail to talk to > your server. It obviously needs to be the wan port of your router. > > I ran into this while listening to the UBNT talk. I was trying to add a > bunch of CPE and found that they would not talk to my server behind NAT. I > figured since a DNS server is a forced settings item the CPE would do > nslookup for the proper server. They don't! > > ryan > > > On 10/19/2011 8:50 AM, Josh Luthman wrote: >> >> Too many Air products. >> >> If you're doing a broadcast discovery they need to be in the same >> collision domain, same interface of the router, etc. I expect you're >> probably trying that and they are on a different collision domain so >> what you do is add an IP range in the scan box (ie 10.10.10.0/24 and >> 172.16.2.0/24 and 192.168.233.0/24) >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Wed, Oct 19, 2011 at 11:48 AM, Patrick D. Nix, Jr >> <pni...@cnetworksolutions.com> wrote: >>> >>> Cameras? No cameras, just managing the APs and CPEs. All of my APs are >>> added as infrastructure already, still not working. Are there any >>> additional ports that need to be open to establish communication? >>> >>> Patrick Nix, Jr., >>> Computer Network Solutions >>> CSWEB.NET Internet Services >>> IT Manager >>> http://www.cnetworksolutions.com >>> http://www.csweb.net >>> (918) 235-0414 >>> >>> >>> Attention: This e-mail and any attachments may contain confidential and >>> privileged information. If you are not the intended recipient, please notify >>> the sender immediately by return e-mail, delete this e-mail and destroy any >>> copies. Any dissemination or use of this information by a person other than >>> the intended recipient is unauthorized and may be illegal. >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Josh Luthman >>> Sent: Wednesday, October 19, 2011 10:41 AM >>> To: WISPA General List >>> Subject: Re: [WISPA] Aircontrol for UBNT >>> >>> Just add the cameras as infrastructure. It's the easiest way and best >>> way (it's documented!!!) >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> On Wed, Oct 19, 2011 at 11:39 AM, Patrick D. Nix, Jr >>> <pni...@cnetworksolutions.com> wrote: >>>> >>>> Having trouble establishing communication to radios via aircontrol. It >>>> is >>>> definitely an issue with our firewall (using a imagestream rebel running >>>> iptables via powercode) because when I initiate a rebuild the >>>> communication >>>> comes up after the services process it goes down again. I already have >>>> port >>>> 22 and port 9080 open. Any ideas? >>>> >>>> >>>> >>>> Pat >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/