You probably either have 1) noisy channels, 2) incorrect ACK distances, 3) not 
optimal firmware version, 4) Or some third party factor effecting testing, such 
as testing devices that cant generate that much traffic or buffer sizes of 
routers.

The first thing to try is switch down to 20mhz channel and see if the speed 
tests stays the same or higher, or if it drops proportionally. I bet the 20Mhz 
channel will perform better.
Dont rely on CCQ on its own. Its one indicator, but does not mean you have a 
clean channel for sure.  Also remember, the Eth port is limited to 100mb, and 
if there is cable quality issues such as due to distance, it could autoadjust 
to half duplex. Test laptop to PC, isolating RF path, just for grins.  It is 
very rare to find 40Mhz of clean spectrum for Dual polarity, and even the 
slightest packet loss and delay can drastically reduce TCP throughput. 
 
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


  ----- Original Message ----- 
  From: Patrick D. Nix, Jr 
  To: WISPA General List 
  Sent: Monday, October 24, 2011 3:50 PM
  Subject: Re: [WISPA] UBNT Rocket M5 Throughput


  Problem is when I turn airmax on the speed really goes in the toilet.  Best I 
can get is about 20mbps. According to ubiquiti airmax needs to be off up to 
15km links, anything over  that airmax needs to be on.  Do you have good 
success with short airmax ptp links?

   

   

  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of Travis Johnson
  Sent: Monday, October 24, 2011 2:45 PM
  To: WISPA General List
  Subject: Re: [WISPA] UBNT Rocket M5 Throughput

   

  Turn AirMax on.

  Travis

  On 10/24/2011 1:36 PM, Patrick D. Nix, Jr wrote: 

   

   

  What is the best real TCP throughput up/down anyone is getting on a PtP ubnt 
connection?  We have two rocket M5 approx 1.5 mi, CCQ 97-98%, 40mhz channel 
width, airmax off.

   

  Displayed TX/RX rate is 270/270.  Real TCP throughput via iperf radio to 
radio is 40-45mbps.

   

  Are there some config changes needed perhaps?






  
--------------------------------------------------------------------------------WISPA
 Wants You! Join 
today!http://signup.wispa.org/--------------------------------------------------------------------------------
 WISPA Wireless List: wireless@wispa.org 
Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless 
Archives: http://lists.wispa.org/pipermail/wireless/

------------------------------------------------------------------------------




  
--------------------------------------------------------------------------------
  WISPA Wants You! Join today!
  http://signup.wispa.org/
  
--------------------------------------------------------------------------------
   
  WISPA Wireless List: wireless@wispa.org

  Subscribe/Unsubscribe:
  http://lists.wispa.org/mailman/listinfo/wireless

  Archives: http://lists.wispa.org/pipermail/wireless/

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to