why not just let them use your system for the scanners? Everything will work better that way. marlon
----- Original Message ----- From: Steve Barnes To: WISPA General List Sent: Wednesday, December 14, 2011 12:47 PM Subject: [WISPA] Horizontal or Vertical I have a company that is going to deploy a WiFi Hotspot underneath a tower that I already have 4 UBNT M2 Sectors on. The reason for the Deploy is they need to use hand barcode scanners over their whole Lot. Luckily they plan to work with me on this situation and coordinate frequencies. I have a stock of old Omni's that I have taken down, half are Horizontal and Half are vertical polarity. Since my AP's are dual pol that does not matter. There however is generally less noise on Horizontal. The hand held barcode readers give no spec as to how the internal antenna is oriented. What would others recommendation. I am using as high gain antenna as possible then turning down the transmit so the receive will be good both ways. This will be covering about 4 acres. Steve Barnes General Manager PCS-WIN / RC-WiFi ------------------------------------------------------------------------------ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/