it is both, although it is not documented. When using AC it is a UPS.
On Saturday 11/08/2012 at 5:38 pm, ~NGL~ wrote:
This appears to be AC powered
From: Phil Curnutt
Sent: Saturday, August 11, 2012 5:16 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
Cisco Catalyst 2955C. 12 port, 24 VDC power.
Phil
On Sat, Aug 11, 2012 at 5:47 PM, ~NGL~ <n...@ngl.net> wrote:
What I have is 7 AP's on a tower. I need to connect tnem a
togeather as you would using a switch. Each AP has its own POE and
power.
NGL
From: Josh Luthman
Sent: Saturday, August 11, 2012 4:41 PM
To: WISPA General List
Subject: Re: [WISPA] 24 volt switch
Could you use a toughswitch? Or Digital Loggers?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 11, 2012 7:32 PM, "~NGL~" <n...@ngl.net> wrote:
I need a 24 volt DC 8 port switch. I want to power it directly off
the batteries. No transformer.
Any suggestions?
NGL If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
