Now I remember that same cover is covered by a little steel plate on the
5GHz...thus Victoria is correct in that you need a serial cable to connect
to it.  Per the manual it also states that and how to wire one if you don't
have it.

Regards,
Chuck


On Fri, Aug 31, 2012 at 1:32 PM, Chuck Hogg <ch...@shelbybb.com> wrote:

> Ok, well then I don't know.  I thought they were the same unit as the
> 900's with different frequency.  The 900's have that port covered with a
> rubber grommet that has a reset button on the board.  The grommet also
> covers the LEDs.  I looked at the manual of the 5830AP and that looked to
> be the same unit.
>
> Regards,
> Chuck
>
>
>
> On Fri, Aug 31, 2012 at 1:20 PM, Josh Luthman <j...@imaginenetworksllc.com
> > wrote:
>
>> That's only on the FOX radios according to that manual.
>>
>> I don't see the button on my bigger units, 5800 and 5830.
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Fri, Aug 31, 2012 at 1:17 PM, Chuck Hogg <ch...@shelbybb.com> wrote:
>>
>>> On the bottom there is a reset button under the rubber plug.
>>>
>>> Pressing the reset button will reset the radio's IP address to factory
>>> default of 192.168.100.100, and password trango.
>>>
>>> I confirmed this with the manual:
>>> http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf
>>>
>>> Regards,
>>> Chuck
>>>
>>>
>>>
>>> On Fri, Aug 31, 2012 at 12:13 PM, Tony C. Loosle <wl-t...@loosle.com>wrote:
>>>
>>>> 5830AP
>>>>
>>>>
>>>>
>>>>   Chuck Hogg <ch...@shelbybb.com>
>>>>  Friday, August 31, 2012 9:45 AM
>>>> What model radio is this?
>>>>
>>>> Regards,
>>>> Chuck
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>   Tony C. Loosle <wl-t...@loosle.com>
>>>>  Friday, August 31, 2012 9:42 AM
>>>>  I need to factory reset the radio as the ip it was configured with was
>>>> lost.
>>>>
>>>> t
>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>   Sam Tetherow <tethe...@shwisp.net>
>>>>  Friday, August 31, 2012 9:29 AM
>>>> Can you log in, or is that the problem?
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>>   tcl <t...@loosle.net>
>>>>  Thursday, August 30, 2012 6:00 PM
>>>> Any old timers here remember how to reset a trango 58 series ap?
>>>>
>>>> t
>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>

<<inline: compose-unknown-contact.jpg>>

_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to