Re: [WISPA] Trango

[Tony C. Loosle]

Yeah, no reset button on the 5830, but is on the 900ap. With a serial and a telnet connection I think anything can be reset up.  Thanks for the help t Josh Luthman Friday, August 31, 2012 11:46 AM They actually starting coming with removable rubber doors... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless Chuck Hogg Friday, August 31, 2012 11:34 AM Now I remember that same cover is covered by a little steel plate on the 5GHz...thus Victoria is correct in that you need a serial cable to connect to it.  Per the manual it also states that and how to wire one if you don't have it. Regards, Chuck _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless Chuck Hogg Friday, August 31, 2012 11:32 AM Ok, well then I don't know.  I thought they were the same unit as the 900's with different frequency.  The 900's have that port covered with a rubber grommet that has a reset button on the board.  The grommet also covers the LEDs.  I looked at the manual of the 5830AP and that looked to be the same unit. Regards, Chuck _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless Josh Luthman Friday, August 31, 2012 11:20 AM That's only on the FOX radios according to that manual. I don't see the button on my bigger units, 5800 and 5830. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless Chuck Hogg Friday, August 31, 2012 11:17 AM On the bottom there is a reset button under the rubber plug. Pressing the reset button will reset the radio's IP address to factory default of 192.168.100.100, and password trango. I confirmed this with the manual: http://www.barco.cz/en/data/products/download/Access5830_UserManual_F.pdf Regards, Chuck _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless

_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless