I like what you did here: https://lh4.googleusercontent.com/-uSvf_bhcyXE/TMY6GYrz3HI/AAAAAAAAAIo/5ErZI4Y93D4/w560-h746-no/wasabinet_bolita_small.jpg I sort of had that thought in my mind already, but couldn't envision how to make a bottom piece to hold down the tripod. Now that I see a photo, I may run with this design. I can get the tripods and masts locally, plus a quick trip to the lumber store to pick up pressure treated lumber and a couple of cement blocks.
Thanks. On Tue, Jul 30, 2013 at 2:14 PM, Ben West <b...@gowasabi.net> wrote: > For ultra low-cost non-penetrating roof mounts, I've been playing around > with J-Bars salvaged from discarded Dish TV equipment, mounted to a base > made from scrap treated lumber and weighted down with cinderblocks. Then, > I mate a vertical length of EMT conduit, 1/2" or better yet 3/4", using a > couple conduit hangers. > > http://goo.gl/ojvZu0 > http://goo.gl/6Wu0My > > Maybe this can give you a general idea, although this would definitely > have a conspicuous DIY look. (I just try to make these things in batch, to > conserve on labor.) > > I should note the latter photo, which might be of the most interest to > you, is now out of date. The wood beams making up the base were rearranged > into a "V" shape for more width, with a metal brace spanning the mouth of > the "V" for stiffness. Likewise the 24inch vertical mast was replaced with > a completely straight section of EMT, instead of that weird zig-zag piece I > originally happened to have lying around. > > On Tue, Jul 30, 2013 at 12:58 PM, Joshua Zukerman <haw...@gmail.com>wrote: > >> Hello list, >> >> I am setting up a PtP link between two gas stations for a client. I am >> going to be using two Nanostation M5 units going about 1/2mi diagonally >> across a highway. I'd like to mount them to a 5ft mast then to a >> non-penetrating roof mount, as the only place with clear line-of-sight is >> on the roof of both gas stations. Flat roof without much of a lip to mount >> an antenna to. All of my Google searches come up with much larger >> non-penetrating roof mounts, 3' or wider, which are designed for much >> larger and taller masts. Also very pricey, $150 or more each. >> >> Does anyone make a small non-penetrating roof mount, say 2ft square out >> of metal with an attachment to hold a 5ft mast or including a 5ft mast? >> Maybe a single cinder/cement block to weigh it down would be all that is >> needed. Won't ever need to go higher. >> >> Or do you have another suggestion for mounting? >> >> Thanks in advance, >> >> Josh >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> > > > -- > Ben West > http://gowasabi.net > b...@gowasabi.net > 314-246-9434 > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless