I would think the radio will have to have a connection to use full amps.
On Tue, Sep 24, 2013 at 4:51 PM, Josh Luthman <j...@imaginenetworksllc.com>wrote: > So funny story - my original ToughSwitch died sometime between Friday and > today. This came from Ubnt themselves in Vegas last year (it almost made > it a year). > > So I took the new one in the box and put it in. I did all of the > measurements on the AC side because I have a cord that enables me to easily > do this. To measure the DC side, I'd have to cut open the wiring and I'd > probably throw it away afterwards. > > 121.4 to 122.2 vac > default (powered on, logged into it) 0.05 amp > enabled all 5 poe ports (24v) no change > put on old ns2 got .07 amps > put on ns5m got .09 amps > > Now I'm not very confident in saying a Ubnt radio is only 2.5 watts > (122vac * 0.02amps), but at idle I can't say that's impossible. It > definitely went up another 0.01 amps while booting, but lost it when it was > fully booted. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Sep 24, 2013 at 4:03 PM, ~NGL~ <n...@ngl.net> wrote: > >> ** >> 4 ports will be POE, 1 will be a switch >> NGL >> >> *From:* Randy Cosby <dco...@infowest.com> >> *Sent:* Tuesday, September 24, 2013 12:45 PM >> *To:* WISPA General List <wireless@wispa.org> >> *Subject:* Re: [WISPA] ToughSwitch Question >> >> Better also plan on how many ports will have POE turned on -- even if you >> don't have load on them yet to measure against. Turning the relays "on" >> takes more power. >> >> >> On 9/24/2013 1:32 PM, ~NGL~ wrote: >> >> Thanx, I really need to know. >> NGL >> >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *Sent:* Tuesday, September 24, 2013 11:06 AM >> *To:* WISPA General List <wireless@wispa.org> >> *Subject:* Re: [WISPA] ToughSwitch Question >> >> If you can't get the answer let me know, I have an amp meter and a NIB >> ToughSwitch. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> On Tue, Sep 24, 2013 at 1:55 PM, Clay Stewart < >> cstew...@stewartcomputerservices.com> wrote: >> >>> DO not know off hand, but what I do is use an APC UPS unit with LED >>> power wattage info, plug in the item I want to know the true wattage and >>> these guys will give it too you. More accurate then a spec sheet ;') >>> >>> >>> On Tue, Sep 24, 2013 at 12:18 PM, ~NGL~ <n...@ngl.net> wrote: >>> >>>> Anyone know the wattage a ToughSwitch 5 port uses when powered >>>> directly by a 24 volt battery system. I need to be sure I have enough solar >>>> to keep tha system up >>>> Thanx >>>> NGL >>>> If you can read this Thank A Teacher. >>>> And if it's in English Thank A Soldier! >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>> >>> >>> -- >>> >>> >>> -- >>> SCS >>> Clay Stewart >>> CEO, Tye River Farms, Inc., >>> DBA Stewart Computer Services >>> 434.263.6363 O >>> 434.942.6510 C >>> cstew...@stewartcomputerservices.com >>> “We Keep You Up and Running” >>> Wireless Broadband >>> Programming >>> Network Services >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@wispa.org >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >> ------------------------------ >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> >> _______________________________________________ >> Wireless mailing >> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless >> >> >> -- >> Randy Cosby >> InfoWest, Inc435-674-0165 x 2010 >> >> ------------------------------ >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > -- -- SCS Clay Stewart CEO, Tye River Farms, Inc., DBA Stewart Computer Services 434.263.6363 O 434.942.6510 C cstew...@stewartcomputerservices.com “We Keep You Up and Running” Wireless Broadband Programming Network Services
<<image/gif>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
