4 watts min but use 6 for your budget. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 24, 2013 6:50 PM, "~NGL~" <n...@ngl.net> wrote:
> ** > Example: > If I had 4 Bullet M2s which draw 7 Watts each I would be drawing 28 watts > total for the bullets. How much more wattage should I allow for the TS5? > Thanx > NGL > > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *Sent:* Tuesday, September 24, 2013 2:30 PM > *To:* WISPA General List <wireless@wispa.org> > *Subject:* Re: [WISPA] ToughSwitch Question > > Connection? I think it'd have to be passing traffic. There is only one > processor for wifi and cpu - it's already ticking upon power and > association would be negligible. > > From my tests on DC (from batteries) association had no relevance. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Sep 24, 2013 at 5:25 PM, Clay Stewart < > cstew...@stewartcomputerservices.com> wrote: > >> I would think the radio will have to have a connection to use full amps. >> >> >> On Tue, Sep 24, 2013 at 4:51 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> So funny story - my original ToughSwitch died sometime between Friday >>> and today. This came from Ubnt themselves in Vegas last year (it almost >>> made it a year). >>> >>> So I took the new one in the box and put it in. I did all of the >>> measurements on the AC side because I have a cord that enables me to easily >>> do this. To measure the DC side, I'd have to cut open the wiring and I'd >>> probably throw it away afterwards. >>> >>> 121.4 to 122.2 vac >>> default (powered on, logged into it) 0.05 amp >>> enabled all 5 poe ports (24v) no change >>> put on old ns2 got .07 amps >>> put on ns5m got .09 amps >>> >>> Now I'm not very confident in saying a Ubnt radio is only 2.5 watts >>> (122vac * 0.02amps), but at idle I can't say that's impossible. It >>> definitely went up another 0.01 amps while booting, but lost it when it was >>> fully booted. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> On Tue, Sep 24, 2013 at 4:03 PM, ~NGL~ <n...@ngl.net> wrote: >>> >>>> ** >>>> 4 ports will be POE, 1 will be a switch >>>> NGL >>>> >>>> *From:* Randy Cosby <dco...@infowest.com> >>>> *Sent:* Tuesday, September 24, 2013 12:45 PM >>>> *To:* WISPA General List <wireless@wispa.org> >>>> *Subject:* Re: [WISPA] ToughSwitch Question >>>> >>>> Better also plan on how many ports will have POE turned on -- even if >>>> you don't have load on them yet to measure against. Turning the relays >>>> "on" takes more power. >>>> >>>> >>>> On 9/24/2013 1:32 PM, ~NGL~ wrote: >>>> >>>> Thanx, I really need to know. >>>> NGL >>>> >>>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>>> *Sent:* Tuesday, September 24, 2013 11:06 AM >>>> *To:* WISPA General List <wireless@wispa.org> >>>> *Subject:* Re: [WISPA] ToughSwitch Question >>>> >>>> If you can't get the answer let me know, I have an amp meter and a NIB >>>> ToughSwitch. >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> >>>> On Tue, Sep 24, 2013 at 1:55 PM, Clay Stewart < >>>> cstew...@stewartcomputerservices.com> wrote: >>>> >>>>> DO not know off hand, but what I do is use an APC UPS unit with LED >>>>> power wattage info, plug in the item I want to know the true wattage and >>>>> these guys will give it too you. More accurate then a spec sheet ;') >>>>> >>>>> >>>>> On Tue, Sep 24, 2013 at 12:18 PM, ~NGL~ <n...@ngl.net> wrote: >>>>> >>>>>> Anyone know the wattage a ToughSwitch 5 port uses when powered >>>>>> directly by a 24 volt battery system. I need to be sure I have enough >>>>>> solar >>>>>> to keep tha system up >>>>>> Thanx >>>>>> NGL >>>>>> If you can read this Thank A Teacher. >>>>>> And if it's in English Thank A Soldier! >>>>>> >>>>>> _______________________________________________ >>>>>> Wireless mailing list >>>>>> Wireless@wispa.org >>>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> >>>>> -- >>>>> SCS >>>>> Clay Stewart >>>>> CEO, Tye River Farms, Inc., >>>>> DBA Stewart Computer Services >>>>> 434.263.6363 O >>>>> 434.942.6510 C >>>>> cstew...@stewartcomputerservices.com >>>>> “We Keep You Up and Running” >>>>> Wireless Broadband >>>>> Programming >>>>> Network Services >>>>> >>>>> _______________________________________________ >>>>> Wireless mailing list >>>>> Wireless@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> >>>> ------------------------------ >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>>> >>>> _______________________________________________ >>>> Wireless mailing >>>> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>>> -- >>>> Randy Cosby >>>> InfoWest, Inc435-674-0165 x 2010 >>>> >>>> ------------------------------ >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> Wireless@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@wispa.org >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >> >> >> -- >> >> >> -- >> SCS >> Clay Stewart >> CEO, Tye River Farms, Inc., >> DBA Stewart Computer Services >> 434.263.6363 O >> 434.942.6510 C >> cstew...@stewartcomputerservices.com >> “We Keep You Up and Running” >> Wireless Broadband >> Programming >> Network Services >> >> _______________________________________________ >> Wireless mailing list >> Wireless@wispa.org >> http://lists.wispa.org/mailman/listinfo/wireless >> >> > ------------------------------ > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
<<image/gif>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless