Thanks for the suggestions. I got the beam claps (c-clamps) and pipe clamps from a local electrical supply house. Bought some bolts and nuts at the local hardware store. Reamed out the hole a little larger on the pipe clamp bolt and put them on. (attached a photo)
Hopefully this will work. I'll find out next week. Thanks again. On Thu, Sep 26, 2013 at 5:40 AM, Scott Reed <sr...@nwwnet.net> wrote: > I get beam clamps and other required hardware from a local electrical > supplier. > I would put a beam clamp on the bottom of one of the beams going left to > right. Bolted to that would be a Minerallac clamp for the size pipe you > are using. We would use 1-1/2" EMT. Another beam clamp and pipe clamp > at the top of the beam that runs up and down in the picture. We do 10' > pipe as long as we can get more than 2' separation of the clamps. > Shorter pipe if clamps closer together. Also depends on what is going on > it, but that is a general rule. > > On 9/25/2013 7:40 PM, Faisal Imtiaz wrote: > > Do a google search for Beam Clamps. > > You can get creative with them along with Struts. > > > > Regards. > > > > Faisal Imtiaz > > Snappy Internet & Telecom > > 7266 SW 48 Street > > Miami, FL 33155 > > Tel: 305 663 5518 x 232 > > > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > > > ----- Original Message ----- > >> From: "Joshua Zukerman" <li...@snowpondtech.com> > >> To: wireless@wispa.org > >> Sent: Wednesday, September 25, 2013 5:12:05 PM > >> Subject: Re: [WISPA] Need mast mounting bracket for I-Beam > >> > >> Forgot to include a photo (120KB attached). > >> > >> > >> On Wed, Sep 25, 2013 at 5:05 PM, Joshua Zukerman > >> <li...@snowpondtech.com>wrote: > >> > >>> Hello list, > >>> > >>> I have a client that I am setting up a PtP wireless link between two > >>> buildings. The antenna will be going on the roof of a service station, > that > >>> has steel I-beams going across it. I want to mount a 5' mast > (RadioShack > >>> mast) to the I-Beam if possible. What brackets are made for this > >>> application? > >>> > >>> Thanks, > >>> > >>> -- > >>> Joshua Zukerman > >>> President > >>> Snow Pond Technology Group Inc. > >>> www.snowpondtech.com > >>> > >> > >> > >> -- > >> Joshua Zukerman > >> President > >> Snow Pond Technology Group Inc. > >> www.snowpondtech.com > >> > >> _______________________________________________ > >> Wireless mailing list > >> Wireless@wispa.org > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > > _______________________________________________ > > Wireless mailing list > > Wireless@wispa.org > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > ----- > > No virus found in this message. > > Checked by AVG - www.avg.com > > Version: 2013.0.3408 / Virus Database: 3222/6697 - Release Date: 09/25/13 > > > > > > -- > Scott Reed > Owner > NewWays Networking, LLC > Wireless Networking > Network Design, Installation and Administration > Mikrotik Advanced Certified > www.nwwnet.net > (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > -- Joshua Zukerman President Snow Pond Technology Group Inc. www.snowpondtech.com
<<attachment: rDO4nCA.jpg>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
