Hi Edward, I think this is what you may be looking for:

 

On the AU:

 

5 - Advanced Configuration

4 - Bridge Parameters

4 - Broadcast/Multicast Relaying AND 5 - Unicast Relaying

 

Adam

 

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Edward Spoon
Sent: Monday, January 20, 2014 4:27 PM
To: WISPA General List
Subject: Re: [WISPA] Alvarion VL SU to SU

 

Yes, I am trying to get Mikrotiks behind 2 different SU's associated to the
same AP to talk to each other. Unicast didn't do it and I can't find any
"MAC forwarding" settings. Will see if renumbering is an option and try that
next.

 

Thanks

 




 

 

 

On Mon, Jan 20, 2014 at 2:28 PM, Matt Hoppes <mhop...@indigowireless.com
<mailto:mhop...@indigowireless.com> > wrote:

Oh... sorry I thought we were talking about one SU talking to the other
while both were connected to the same AU.

Yeah, I don't know of anyway to make an SU talk to an SU direct.



Matt Hoppes
Director of Information Technology
Indigo Wireless
+1 (570) 723-7312 <tel:%2B1%20%28570%29%20723-7312> 

On 1/20/14, 3:22 PM, Patrick Leary wrote:
> At one point they had a "cell extender" that acted as a repeater, but that
was an AU and SU merged into a single NEMA box. I know of no way to connect
SU to SU directly without an AU in the middle. The caveat is that I was
never an engineer, so maybe there was some super secret agent setting for
which I had no knowledge. I doubt it though, otherwise they'd no have built
the extender.
>
> Patrick Leary
>   M 727.501.3735 <tel:727.501.3735> 
>
>
>
>
>
>
> -----Original Message-----
> From: wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org>
[mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> ] On
Behalf Of Matt Hoppes
> Sent: Monday, January 20, 2014 3:19 PM
> To: WISPA General List
> Subject: Re: [WISPA] Alvarion VL SU to SU
>
> Hmmmm, I thought I recalled that you could turn that off?  Or maybe it was
you have to assign a different subnet IP to each device so they talk through
the head router.
>
>
> Matt Hoppes
> Director of Information Technology
> Indigo Wireless
> +1 (570) 723-7312 <tel:%2B1%20%28570%29%20723-7312> 
>
> On 1/20/14, 3:15 PM, Patrick Leary wrote:
>> Edward, from my Alvarion days, I know of no way to enable CPE to CPE
connection.
>>
>> Patrick Leary
>>    M 727.501.3735 <tel:727.501.3735> 
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org>
[mailto:wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> ]
>> On Behalf Of Matt Hoppes
>> Sent: Monday, January 20, 2014 2:28 PM
>> To: WISPA General List
>> Subject: Re: [WISPA] Alvarion VL SU to SU
>>
>> It is, but it's been way too long, I don't recall where the setting is.
>>
>>
>> Matt Hoppes
>> Director of Information Technology
>> Indigo Wireless
>> +1 (570) 723-7312 <tel:%2B1%20%28570%29%20723-7312> 
>>
>> On 1/20/14, 2:10 PM, Edward Spoon wrote:
>>> Seems like there is a filter preventing SU to SU communication on the
>>> same AP. I know Trango's had this and had an option to enable or
>>> disable. Anyone familiar with where this setting would be in the
>>> Alvarion setup, if it is configurable at all?
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless@wispa.org <mailto:Wireless@wispa.org> 
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless@wispa.org <mailto:Wireless@wispa.org> 
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>>
>> **********************************************************************
>> ************** This footnote confirms that this email message has been
>> scanned by PineApp Mail-SeCure for the presence of malicious code,
vandals & computer viruses.
>> **********************************************************************
>> **************
>>
>>
>>
>>
>>
>>
>> **********************************************************************
>> ************** This footnote confirms that this email message has been
>> scanned by PineApp Mail-SeCure for the presence of malicious code,
>> vandals & computer viruses.
>> **********************************************************************
>> **************
>>
>>
>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless@wispa.org <mailto:Wireless@wispa.org> 
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
> _______________________________________________
> Wireless mailing list
> Wireless@wispa.org <mailto:Wireless@wispa.org> 
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
>
>
****************************************************************************
********
> This footnote confirms that this email message has been scanned by PineApp
Mail-SeCure for the presence of malicious code, vandals & computer viruses.
>
****************************************************************************
********
>
>
>
>
>
>
>
****************************************************************************
********
> This footnote confirms that this email message has been scanned by
> PineApp Mail-SeCure for the presence of malicious code, vandals & computer
viruses.
>
****************************************************************************
********
>
>
>
> _______________________________________________
> Wireless mailing list
> Wireless@wispa.org <mailto:Wireless@wispa.org> 
> http://lists.wispa.org/mailman/listinfo/wireless
>
_______________________________________________
Wireless mailing list
Wireless@wispa.org <mailto:Wireless@wispa.org> 
http://lists.wispa.org/mailman/listinfo/wireless

 

_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to