I have this same problem sporadically with PowerBeam M2 400's in PTP mode. I have the Watchdog watch both sides of the link and restart the device when it has issues. I loose connectivity for about 3 minutes when it happens, but at least it's not down until the user restarts it.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of OOLLC-Support Sent: Wednesday, October 26, 2016 12:26 PM To: [email protected] Subject: [WISPA] nanobeam m2 shutting down am having an issue with a few nanobeam m2 (little moon shaped things). As looked at on the main tab the TX/RX goes to 1/130 Mbs and sticks there, customer calls and complains about no internet. Have to power cycle it to get it working again. All other CPEs off same tower working fine which are mostly nanostation or airgrid models. Upgrade to 5.6.9 does not help. -- Jan V _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
