You only have two options... CMTS (DOCSIS) PTMP MoCA PTP
I would look at docsis...we have been doing MDU for 15 years now and a majority of our portfolio is MDU and we started with docsis...like anything it has it downsides but it works and it is robust, cost effective and scaleable. ::://Shawn C. Peppers\\::: > On Feb 24, 2018, at 8:50 PM, Dan Harling <[email protected]> wrote: > > Hello, > > We're setting up service in an MDU that has coax home-runs to each unit, but > no Ethernet. Normally in such situations, we deliver internet access > wirelessly via access points in the hallways. Increasingly, however, > interference and bandwidth expectations are making this solution less > effective. > > So, we're looking for recommendations for an Ethernet-over-Coax solution. It > absolutely must inject onto a cable already carrying broadcast TV signals. > We'd prefer a simple point-to-point solution, rather than a hub that > simulates a switch, so that security between subscribers isn't based on > firmware that was designed for (say) security cameras. > > I see inexpensive devices along these lines that are designed for Cable or > Satellite TV signals, but no indication whether they would clobber broadcast > TV signals. Any suggestions? > > Daniel Harling <>< > Engineering, Cape Ann Communications > 183 Main Street, Gloucester, MA 01930 > [email protected] > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
