Look into a cmts system Bruce Bridgewater
-----Original Message----- From: Sean Heskett <af...@zirkel.us> To: WISPA General List <wireless@wispa.org> Sent: Sat, 24 Feb 2018 9:53 PM Subject: Re: [WISPA] Fwd: MDU Ethernet over Coax recommendations I’m not an expert in coax deployments but I know calix has a g.fast over coax system. I don’t know if you can still deliver cable tv over the coax tho. Sean On Sat, Feb 24, 2018 at 6:50 PM Dan Harling <ad...@capeanncomm.com> wrote: > Hello, > > We're setting up service in an MDU that has coax home-runs to each unit, > but no Ethernet. Normally in such situations, we deliver internet access > wirelessly via access points in the hallways. Increasingly, however, > interference and bandwidth expectations are making this solution less > effective. > > So, we're looking for recommendations for an Ethernet-over-Coax solution. > It absolutely must inject onto a cable already carrying broadcast TV > signals. We'd prefer a simple point-to-point solution, rather than a hub > that simulates a switch, so that security between subscribers isn't based > on firmware that was designed for (say) security cameras. > > I see inexpensive devices along these lines that are designed for Cable or > Satellite TV signals, but no indication whether they would clobber > broadcast TV signals. Any suggestions? > > Daniel Harling <>< > Engineering, Cape Ann Communications > 183 Main Street, Gloucester, MA 01930 > harl...@capeanncomm.com > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless >
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
