Do you think it is an issue of SqlExtension? Or is it supposed to require TCP/IP enabled even on the same server?
-- Yan On Mon, Oct 17, 2011 at 9:54 AM, Michael Osmond <mosm...@baytech.com.au>wrote: > Hello Yan > > Thanks for letting me know, > > I don't fully know how it finds instances on different ports actually. All > I could think of, was that the MSI was not managing to connect to the > database server, even when it is on the same server. > > Regards > > Michael > > > > -----Original Message----- > From: Yan Sklyarenko [mailto:yansklyarenko+...@gmail.com] > Sent: Monday, 17 October 2011 4:47 PM > To: General discussion for Windows Installer XML toolset. > Subject: Re: [WiX-users] ExecuteSqlStrings fails with the Error 0x80004005: > failed to connect to database: 'master' > > Bingo! Thanks a lot, Michael! > > It was TCP/IP, which was disabled. I played a bit with ports, and it really > turns out that 1433 is required for default instance, but named instance > can > use a different one. > > I know this is out of scope of the current mailing list, but probably you > know why it works this way? I mean, why only 1433 is required for default > SQL instance? > > Once again, thanks a lot! > > -- Yan > > On Thu, Oct 13, 2011 at 11:01 PM, Michael Osmond <mosm...@baytech.com.au > >wrote: > > > Hello Yan > > > > I tried your test msi and it works fine as is on my machine, so it is > going > > to be environment. > > > > The only other thing I could suggest you check is go to Sql Server > > Configuration Manager (should be in the Program Menu) and check the > > protocols being used - ensure that TCP/IP is enabled, and check the port > > number the default should be 1433. > > > > Regards > > > > Michael > > > > -----Original Message----- > > From: Yan Sklyarenko [mailto:yansklyarenko+...@gmail.com] > > Sent: Wednesday, 12 October 2011 7:19 PM > > To: General discussion for Windows Installer XML toolset. > > Subject: Re: [WiX-users] ExecuteSqlStrings fails with the Error > 0x80004005: > > failed to connect to database: 'master' > > > > Ok, I've spent quite some time investigating and researching, but with no > > luck. > > > > @Michael, the server logs are empty. There's simply no trace during the > > time > > slot my installation runs and fails. Maybe, there's a "verbose" mode or > > something? > > > > @David, I tried using the profiler (although it is a third-party one > since > > I > > use Express edition of SQL), but it doesn't show anything. I enabled > > tracing > > all events, it started tracing a lot of stuff, but nothing related to the > > running installation, as far as I can see. Probably, the reason is the > > installation fails during the "open connection" operation? I mean, it > > doesn't get to the profiler at that point and fails earlier. > > > > So, I tried narrowing it down and did the following: > > 1) I've created a sample installation to test just this issue (I'll > > include the sources to the end of this reply) > > 2) I've found that the database you connect to (the one you put to the > > SqlDatabase/@Database) doesn't matter! Even if I create a test database > in > > Management Studio, then put this database name to the @Database > attribute, > > it fails with the same error. The user I use for connection is sa. > > 3) I've tried comparing the sa accounts of default and named SQL > > instances, but those are identical as far as I can see. > > > > I'm not a SQL expert, so if you have a guess what I should check > > additionally, please let me know. > > > > *As promised, the sources of the test package it is reproduced with in > 100% > > cases:* > > > > <?xml version="1.0" encoding="UTF-8"?> > > <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"; > > xmlns:sql="http://schemas.microsoft.com/wix/SqlExtension"; > > xmlns:util="http://schemas.microsoft.com/wix/UtilExtension";> > > <Product Id="{42565B10-0796-4fe8-90AC-0135D6E109BA}" Name="SQLdatabase" > > Language="1033" Version="1.0.0.0" Manufacturer="SQLdatabase" > > UpgradeCode="{B85469C8-DF1B-4f6f-BB59-64E3C2A014ED}"> > > <Package InstallerVersion="200" Compressed="yes" /> > > > > <Media Id="1" Cabinet="media1.cab" EmbedCab="yes" /> > > > > <Directory Id="TARGETDIR" Name="SourceDir"> > > <Directory Id="ProgramFilesFolder"> > > <Directory Id="INSTALLLOCATION" Name="SQLdatabase"> > > <Component Id="ProductComponent" > > Guid="{45F0B7D7-BE79-4286-A569-8B266E6011BD}"> > > <File Id="file" > > Source="S:\test.zip" KeyPath="yes" /> > > <sql:SqlString > Id="Query" > > ContinueOnError="no" ExecuteOnInstall="yes" SQL="select @@version" > > SqlDb="MasterDB"/> > > </Component> > > </Directory> > > </Directory> > > </Directory> > > > > <sql:SqlDatabase Id="MasterDB" Server="[SQLSERVER]" Database="[DB]" > > User="SQLUser1" /> > > <util:User Id="SQLUser1" Name="[USER]" Password="[PASSWORD]" /> > > > > <Feature Id="ProductFeature" Title="SQLdatabase" Level="1"> > > <ComponentRef Id="ProductComponent" /> > > </Feature> > > </Product> > > </Wix> > > > > *I run it like this (referencing default SQL instance, throws an error):* > > > > msiexec /i sqldatabase.msi SQLSERVER=. DB=test USER=sa PASSWORD=******* > > LOGVERBOSE=1 /l*v install_default.log > > > > *And this one installs fine (referencing named SQL instance):* > > > > msiexec /i sqldatabase.msi SQLSERVER=.\SQLEXPRESS USER=sa > PASSWORD=******* > > LOGVERBOSE=1 /l*v install_named.log > > > > Any ideas, people? > > > > -- Yan > > > > On Sat, Oct 8, 2011 at 12:05 AM, Michael Osmond <mosm...@baytech.com.au > > >wrote: > > > > > Yan, > > > > > > You will find the Server Log in Management Studio - Under Management -> > > SQL > > > Server Logs. > > > > > > Sorry on the delay, I went home before I got your reply. > > > > > > Michael > > > > > > -----Original Message----- > > > From: Yan Sklyarenko [mailto:yansklyarenko+...@gmail.com] > > > Sent: Friday, 7 October 2011 6:00 PM > > > To: General discussion for Windows Installer XML toolset. > > > Subject: Re: [WiX-users] ExecuteSqlStrings fails with the Error > > 0x80004005: > > > failed to connect to database: 'master' > > > > > > Thanks for the suggestion, Michael! > > > > > > >> To determine the true reason for the failure, the administrator can > > look > > > in the server's error log where a corresponding entry will be written. > > > Could you please point out where I can find this "server's error log" > > > referenced here? > > > > > > -- Yan > > > > > > > > > On Fri, Oct 7, 2011 at 10:12 AM, Michael Osmond < > mosm...@baytech.com.au > > > >wrote: > > > > > > > Hi > > > > > > > > Looks like an Access Denied to me. > > > > > > > > Try the following to work out what is going on; > > > > > > > > This is from an MS Blog > > > > > > > > If the server encounters an error that prevents a login from > > succeeding, > > > > the client will display the following error mesage. > > > > > > > > Msg 18456, Level 14, State 1, Server <server name>, Line 1 > > > > Login failed for user '<user name>' > > > > > > > > Note that the message is kept fairly nondescript to prevent > information > > > > disclosure to unauthenticated clients. In particular, the 'State' > will > > > > always be shown to be '1' regardless of the nature of the problem. To > > > > determine the true reason for the failure, the administrator can look > > in > > > the > > > > server's error log where a corresponding entry will be written. > > > > > > > > An example of an entry is: > > > > > > > > 2006-02-27 00:02:00.34 Logon Error: 18456, Severity: 14, State: > 8. > > > > 2006-02-27 00:02:00.34 Logon Login failed for user '<user name>'. > > > > [CLIENT: <ip address>] > > > > The key to the message is the 'State' which the server will > accurately > > > set > > > > to reflect the source of the problem. In the example above, State 8 > > > > indicates that the authentication failed because the user provided an > > > > incorrect password. The common error states and their descriptions > are > > > > provided in the following table: > > > > > > > > ERROR STATE ERROR DESCRIPTION > > > > 2 and 5 Invalid userid > > > > 6 Attempt to use a Windows login name with SQL > > > Authentication > > > > 7 Login disabled and password mismatch > > > > 8 Password mismatch > > > > 9 Invalid password > > > > 11 and 12 Valid login but server access failure > > > > 13 SQL Server service paused > > > > 18 Change password required > > > > > > > > State 16 = Does not have access to database. > > > > > > > > Regards > > > > > > > > Michael > > > > > > > > > > > > -----Original Message----- > > > > From: Yan Sklyarenko [mailto:yansklyarenko+...@gmail.com] > > > > Sent: Friday, 7 October 2011 5:06 PM > > > > To: General discussion for Windows Installer XML toolset. > > > > Subject: [WiX-users] ExecuteSqlStrings fails with the Error > 0x80004005: > > > > failed to connect to database: 'master' > > > > > > > > Hello WiX Community, > > > > > > > > I have the following problem. > > > > > > > > I have a number of SqlString elements which run "CREATE DATABASE ... > > FOR > > > > ATTACH" kind of queries. It fails to run on SQL 2008 (I tested on R2, > > but > > > > it > > > > seems that pure 2008 is also affected), DEFAULT INSTANCE ONLY. I > mean, > > if > > > I > > > > specify any named instance (like .\SQ:EXPRESS) it works perfectly > fine. > > > > This > > > > is the excerpt from the log file: > > > > ... > > > > MSI (s) (50:AC) [20:36:07:604]: Executing op: > > > > ActionStart(Name=ExecuteSqlStrings,Description=Executing SQL > > Strings...,) > > > > Action 20:36:07: ExecuteSqlStrings. Executing SQL Strings... > > > > MSI (s) (50:AC) [20:36:07:604]: Executing op: > > > > > > > > > > > > > > CustomActionSchedule(Action=ExecuteSqlStrings,ActionType=25601,Source=BinaryData,Target=**********,CustomActionData=**********) > > > > MSI (s) (50:80) [20:36:07:604]: Invoking remote custom action. DLL: > > > > C:\Windows\Installer\MSI7A5C.tmp, Entrypoint: ExecuteSqlStrings > > > > ExecuteSqlStrings: Entering ExecuteSqlStrings in > > > > C:\Windows\Installer\MSI7A5C.tmp, version 3.6.2005.0 > > > > ExecuteSqlStrings: Error 0x80004005: failed to connect to database: > > > > 'master' > > > > Error 26203. Failed to connect to SQL database. (-2147467259 master > ) > > > > MSI (s) (50!C4) [20:36:26:646]: Product: MyProduct 2.0 - > > trunkdefaultsql > > > -- > > > > Error 26203. Failed to connect to SQL database. (-2147467259 master > ) > > > > CustomAction ExecuteSqlStrings returned actual error code 1603 (note > > this > > > > may not be 100% accurate if translation happened inside sandbox) > > > > Action ended 20:36:26: InstallFinalize. Return value 3. > > > > ... > > > > > > > > I tested on both WiX 3.5 (release build) and WiX 3.6 (latest > available, > > > > 2201). > > > > > > > > Has anyone seen this before? What could be the reason? I tried > > reporting > > > > this as an issue, but developers responded that it doesn't sound like > a > > > WiX > > > > issue... > > > > > > > > Thanks in advance, > > > > > > > > -- Yan > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > All of the data generated in your IT infrastructure is seriously > > > valuable. > > > > Why? It contains a definitive record of application performance, > > security > > > > threats, fraudulent activity, and more. Splunk takes this data and > > makes > > > > sense of it. IT sense. And common sense. > > > > http://p.sf.net/sfu/splunk-d2dcopy2 > > > > _______________________________________________ > > > > WiX-users mailing list > > > > WiX-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/wix-users > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > All of the data generated in your IT infrastructure is seriously > > valuable. > > > Why? It contains a definitive record of application performance, > security > > > threats, fraudulent activity, and more. Splunk takes this data and > makes > > > sense of it. IT sense. And common sense. > > > http://p.sf.net/sfu/splunk-d2dcopy2 > > > _______________________________________________ > > > WiX-users mailing list > > > WiX-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/wix-users > > > > > > > > ------------------------------------------------------------------------------ > > All the data continuously generated in your IT infrastructure contains a > > definitive record of customers, application performance, security > > threats, fraudulent activity and more. Splunk takes this data and makes > > sense of it. Business sense. IT sense. Common sense. > > http://p.sf.net/sfu/splunk-d2d-oct > > _______________________________________________ > > WiX-users mailing list > > WiX-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wix-users > > > > > > > ------------------------------------------------------------------------------ > > All the data continuously generated in your IT infrastructure contains a > > definitive record of customers, application performance, security > > threats, fraudulent activity and more. Splunk takes this data and makes > > sense of it. Business sense. IT sense. Common sense. > > http://p.sf.net/sfu/splunk-d2d-oct > > _______________________________________________ > > WiX-users mailing list > > WiX-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wix-users > > > > ------------------------------------------------------------------------------ > All the data continuously generated in your IT infrastructure contains a > definitive record of customers, application performance, security > threats, fraudulent activity and more. Splunk takes this data and makes > sense of it. Business sense. IT sense. Common sense. > http://p.sf.net/sfu/splunk-d2d-oct > _______________________________________________ > WiX-users mailing list > WiX-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wix-users > ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2d-oct _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
