Hmmm..not fixed..but with the latest HRD it now crashes WSJT-X instead of
just producing the rig disappeared dialog.
It appears to be timing sensitive.
I ran this for almost 11 hours yesterday without a problem. Then all of a
sudden it started again.
I had noticed on the network capture that the problem was occurring when the
packets come at the same time (and I mean the EXACT same time according to
the pcap file).
If I get some time this weekend I'll try and figure out what's causing it
and ensure it's still HRD's problem.
Mike W9MDB
From: Bill Somerville [mailto:[email protected]]
Sent: Wednesday, September 03, 2014 5:43 PM
To: [email protected]
Subject: Re: [wsjt-devel] TenTec Omni HRD TCP fix
On 03/09/2014 23:34, Michael Black wrote:
Hi Mike,
I can tell you it sure wasn't intermittent before. All I had to do was
startup HRD Logbook and WSJT-X would pop up the error box within minutes. I
duplicated the problem numerous times as I was experimenting with some
fixes.
So far it hasn't died at all so I think they actually fixed it. I think the
idea of their TCP not being thread safe prompted them pretty good and it was
probably an easy fix.
OK, well we shall see. Hopefully they have change something.
As for the OMNI VII I'm not sure what all control we are supposed to have
from WSJT-X to HRD. All that I know I use is frequency read/write as I do
VOX via the Signalink USB.
So I'm not using any other cat control that I know of. I know you mentioned
split operation but I've never done that. That's only for contest work,
right?
No, split mode allows you to work both JT65 and JT9 in a 4kHz bandwidth
despite your TX bandwidth being around 2.6kHz. It also allows WSJT-X to
always generate TX tones in the 1.5 - 2kHz range thus causing any harmonics
to be above the cut off frequency of your TX filter. You cannot use those
with the Omni VII via HRD until they provide a means of setting split mode
and setting the TX frequency like they do for many other rigs.
I'm still missing PTT and Split buttons on HRD and the wsjtx_trace.log still
shows them missing from the "get buttons" list. Supposed to be on their
list to fix.
Mike W9MDB
73
Bill
G4WJS.
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
