On 12/03/2015 20:56, Guy G4DWV/4X1LT wrote: Hi Guy, > Joe Taylor <joe@...> writes: >> If you are now using WSJT-X v1.3 r3673 or WSJT-X v1.4 rc2, we heartily >> recommend upgrading to the new release. It will likely become the >> "official" Version 1.4.0 release very soon. > I have done so, but cannot get CAT to connect to my FlexRadio 6300 using the > identical settings in v1.3 (working from a screenshot - using TS2000) to > trying the Flex6xxx settings. > > I also has some confusion trying to transfer settings from v1.3 to 1.4 - I > don't know if it is even possible so set up from scratch. Will this be > covered in the official release notes? > > Any ideas for CAT as had to go back to v1.3. Settings are not automatically transferable from v1.3 to v1.4, ongoing they will be automatically carried across versions. You may wish to move your v1.3 log files across to the new log directory, they are compatible.
Assuming you are using SmartSDR. You should be able to set SmartSDR in TS2000 emulation mode and have the WSJT-X "Settings->Radio" along the following lines (these settings should work with DDUtil as well): Rig: Kenwood TS2000 Serial Port: your CAT COM port Baud rate: match your SmartSDR setting Data bits: 8 Stop bits: 1 Handshake: Hardware (maybe None, try both) Force control lines: none PTT Method: CAT Mode: Data/Pkt (USB is also usable but not preferred) Split operation: None (set your SDR Tx and Rx bandwidth to at least 4kHz for dual mode operation) What error message are you getting? > > Mni tnx, > > 73 de Guy G4DWV/4X1LT > 73 Bill G4WJS. > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
