On 27/08/2015 22:01, Richard Stanley wrote:
Hi Richard,
I have been reading people saying that wsjt-x is missing decodes so I
got jt65-hf and jt65-hf-hp9hqx but disabled ptt on the jt65hf versions
and left them running.
jt65-hf-hb9hqx consistently decodes stuff that wsjt-x misses out, at
19:13 wsjt-x reports nothing but the jt65-hf-hb9hqx decodes 2 signals ?
They are all using the same soundcard and radio ?
I have attached a screenshot of the very limited test that I carried out.
The wsjtx version was 5819
Ensure that you have set the default soundcard sample rate to at least
48kHz, this is required for WSJT-X to perform correctly. AFAIK the
JT65-HF programs use an 11.25kHz sample stream which will be optimally
derived from a soundcard set at 44.1kHz. 44.1kHz sample rate is usually
the default and is considered the consumer maximum sample rate.
You should be aware that the jt65-hf variants all use the same decoding
engine which was released with an old variant of WSJT and we are quite
confident that the decoding ability of the current WSJT-X is
considerably improved in both speed and resolution over that rather
ancient version.
Richard m0clz
73
Bill
G4WJS.
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
