On 03/01/2016 14:40, Michael Black wrote: > The attached patch adds a "Freq Resolution" combo box for split > resolution. It defaults to the current value. > When using an auto tuner changing offset in split mode can cause the > tuner to retune since the audio can start anywhere in the 1500-2000Hz > range. On my rig I can use 1Hz and the tuner stays happy on any > offset and retuning on band changes is instantaneous now since it > doesn't need so many memories for all the different base audio > frequencies possible with 500hz. > > RRR > Mike W9MDB Hi Mike,
I don't understand the purpose of this change. The Tx dial frequencies are constrained by the requirement to deliver 1500-2000Hz audio to the transmitter modulator, how does this change make a difference? Aside from that I think you need to limit the smallest resolution to 100Hz since some rigs only tune in coarse steps. There are several rigs with 10Hz steps and I believe there are one or two with 100Hz minimum steps. 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
