Hi Joe Thanks.
I find either exiting the program from MSK144 or using a configuration doesn't seems to work, and the program returns to default 5 s period (which I forgot to mention), Deep decoding and Ftol of 200. I looked in the ini file for MSK144 settings and didn't find them. Charlie > Hi Charlie, > >> Having used MSK144 now with a rather slow PC, it would be a nice to >> have if some previous settings could be recalled on restarting the >> program in MSK144 or switching from another mode into MSK144. >> >> Specifically, the decode setting (in my case fast) and possibly Ftol. >> Getting access to these settings with >100% processor load is somewhat >> difficult as with the defaults the program is slow to respond. >> >> On-air tests on 144MHz have been impressive it also works nicely with >> aircraft scatter at shorter ranges. > > All of the settings you mention will saved if you exit the program in > MSK144 mode, and restored on program restart. > > In many circumstances switching between modes is more convenient if you > use the Configurations menu to make a Configuration for each operating > mode. Then, whenever you switch to that Configuration your favorite > parameters will be restored. > > -- Joe, K1JT > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
