I'm on Ubuntu 15.10 64-bit (yeah...been meaning to upgrade), but if
enabling the instrumentation is just a configure flag or similar I can
build from source.
On Wed, Feb 1, 2017 at 1:27 PM Bill Somerville <[email protected]>
wrote:
> On 01/02/2017 18:07, Phil Frost wrote:
> > I'm using the "Hamlib NET" driver, and it's running and working enough
> > for fldigi and direct testing with telnet. Unfortunately, in WSJT-X
> > doesn't seem to like that the hamlib get/set mode commands are not
> > supported for this radio, even though I've set "Mode" to "None" in the
> > radio settings.
>
> Hi Phil,
>
> WSJT-X should not be doing get or set mode Hamlib commands if
> "Settings->Radio->Mode" is set to "None" but there may be some
> complication when the "Hamlib NET rigctl" back end is involved. At start
> up some mode queries are only protected by checking if the function is
> available and I believe the NET rigctl backend does not correctly
> enumerate which functions are available at the remote end.
>
> I need to find out which mode query is getting triggered, I can do this
> most easily by sending you an instrumented version of WSJT-X. Which
> Ubuntu version and platform are you using -- I can only currently build
> installers for 14.04.xx LTS and 16.04.xx LTS on Intel 32 or 64-bit.
>
> 73
> Bill
> G4WJS.
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
