On 01/02/2017 18:07, Phil Frost wrote: > I'm using the "Hamlib NET" driver, and it's running and working enough > for fldigi and direct testing with telnet. Unfortunately, in WSJT-X > doesn't seem to like that the hamlib get/set mode commands are not > supported for this radio, even though I've set "Mode" to "None" in the > radio settings.
Hi Phil, WSJT-X should not be doing get or set mode Hamlib commands if "Settings->Radio->Mode" is set to "None" but there may be some complication when the "Hamlib NET rigctl" back end is involved. At start up some mode queries are only protected by checking if the function is available and I believe the NET rigctl backend does not correctly enumerate which functions are available at the remote end. I need to find out which mode query is getting triggered, I can do this most easily by sending you an instrumented version of WSJT-X. Which Ubuntu version and platform are you using -- I can only currently build installers for 14.04.xx LTS and 16.04.xx LTS on Intel 32 or 64-bit. 73 Bill G4WJS. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
