Hi Bill , sorry on the WDT I stepped through going up to the maximum, OK on the protocol change for 30 sec period, I've tried editing the standard messages , even putting the QRA locator in the Callsign box so it appears first, but the callsign gets truncated from "G8JVM/B" to "G8JVM/" It would be a nice feature to be able to show that your are in beacon mode by adding a /B to the callsign, or what maybe easy to implement , to allow "/B" to be allowed in the report field, so it would send "IO82SP G8JVM /B", would it be possible to add "/B" as a legitimate entry in the report field to indicate you are in beacon mode. Thanks
On Wed, 9 Aug 2017 21:51:05 +0100 Bill Somerville <g4...@classdesign.com> wrote: > On 09/08/2017 21:31, Richard Bown wrote: > > I'd like to use JT4 in beacon mode on the microwave bands, for propagation > > studies > > Can the WD Tx timer be disabled , maybe in settings the sequence ,97,98,OFF > > Also in the free message format to be able to send <mycallsign>/B <6 digit > > grid> > > what I'm getting is the last letter of the grid is dropped even though the > > whole message > > of "G8JVM/B IO82SP" is less than <callsign> callsign> <report> > > ie what is sent is "G8JVM/B IO82S" > > > > It would be nice if a 30 second period could be selected, two reason it > > wouldn't matter if > > first or second period is selected , and it would keep the SSPA a little > > cooler. > > The UK is getting the reputation of the RF black hole of Europe. > > It would be nice when I'm not using equipment to put it in beacon mode and > > send some RF out of > > the hole. > > HI Richard, > > sure, the watchdog timer can be disabled, set it to "Disabled" which is > just before 1 minute. > > Free text messages are limited to 13 characters including spaces so you > can only send a 6-digit grid locator if the callsign is 6 characters or > less. > > JT4 with a 30s period would be a protocol change, JT4 only sends the > message once per period along with FEC and sync symbols. To shorten the > sequence would require either a faster symbol rate or more tones, a very > different protocol. > > 73 > Bill > G4WJS. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com #################################################################################### Ham Call: G8JVM . QRV: 50-432 MHz + Microwave Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV 6mtrs 200W, 4mtrs 150W, 2mtrs 300W, 70cms 200W, 23cms 140W, 13cms 100W & 3cms 5W OS: Linux Mint 18.1 x86_64 on a Dell Inspiron N5030 laptop #################################################################################### nil carborundum a illegitemis ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel