Fat fingers hit the wrong key. here;s the whole thing
If your serial interface uses the older Prolific 2303 chipset it may be
running into a common driver problem with this component. Evidently at
some point Prolific modified their driver to test for and disable the
counterfeit Chinese versions of the chip. You can do a search for the
earlier version of the driver and replace the Win10 installed version of
the driver and things will work again.
You can check if it's a driver problem:
Open Device Manager
Click on Ports
Right click on the serial port you're using for rig control.
Select "Properties"
If it says something about a "Code 10" error you've got the driver
problem. A search on the web will give you the older versions of the
driver as well as instructions on how to install it if you need the help.
dave
k2lyv
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
