Thanks for the helpful advice on resetting the working frequencies. That fixed the CAT problem.
What remains is the audio problem. When running RC1, audio works fine. When running either other version (without making any change to the audio preferences and regardless of band) there is NO AUDIO. The indicator on the left bottom of the interface shows 0 dB. So, my question is: if the audio preferences are correct in v1.8.0-rc1, why would they not also be correct in either of the succeeding versions? • Tried increasing the audio output of the rig w/o effect. • Tried changing bands w/o effect. • Tried switching from mono to left and right w/o effect. • Checked audio settings in WSJT-X and they are identical. • Tried closing WSJT-X and restarting w/o effect. Thanks to all… Ed W1KOK > On Nov 26, 2017, at 9:15 AM, Bill Somerville <g4...@classdesign.com> wrote: > > On 26/11/2017 17:05, Ed Stokes wrote: >> I have 3 versions of WSJT-X which I run on a Mac Mini under OS X 10.11.6 : >> >> v1.8.0 9/2/17 >> v1.8.0-rc1 7/10/17 >> v1.8.0-rc2 10/28/17 >> >> >> v1.8.0-rc1 runs perfectly. >> >> Close it down, and execute either of the other versions and they: >> >> #1 show frequency / band info in red even though “test CAT” returns a green >> / OK indication >> #2 show no signals / activity on busy band >> >> All preferences are the same, whichever version is executed. >> >> Can anyone tell me what’s going on here and how to fix it? >> >> Ed >> W1KOK > > Hi Ed, > > the RCn versions of WSJT-X v1.8.0 were pre-release beta test versions of > WSJT-X and are now obsolete as the General Availability (GA) version v1.8.0 > has been released. > > RC1 had a defect that meant that installing it created a working frequencies > table that was incompatible with other versions. After installing a later > version you must reset the working frequencies table to rectify the > situation, as documented in all release notes since RC1. > > A lack of signals is probably due to incorrect audio device settings > "Preferences->Audio", ensure that they match the audio device connected to > your rig. > > 73 > Bill > G4WJS. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
