>
> Hello,
>
firstly my thanks to those who are at the coal face developing WSJT and its
brothers.
I would like to see if it would be possible to include a toggle on the main
GUI that stops WSJT-X sending frequency set commands to the transceiver.
When I control my IC-7600 and my IC-910 with WSJT-X it does a great job of
setting the rig to the right frequency for the mode but some times there is
a need to be on a non standard frequency if some one has a birdie or
chasing EME. I find if I go into the settings menu and then come out, (to
check a setting which we all do some times) the software does a frequency
set to the rig and I end up back on a standard frequency for that mode,
which is for those times very un helpful especially when chasing EME on 50
MHz
I had in the past set WSJT-X to be "no rig" to stop this but now I need to
send PTT via CAT to the IC7600 so cannot use that strategy now.
Could the big Green / Red indicator next to the frequency readout be made
into a toggle ? then a mouse click could change the rig mode, add the
colour BLUE (first colour that jumped into my head) to represent the rig
frequency will not be set by the software? (does not require any new GUI
real estate to add the feature). Then a simple mouse click on the
tri-coloured dot can put it back to GREEN for automated setting of the rig.
Unsure if it is only me that experiences this in day to day operating, if
no others support it, then I expect this will not make it through.
Regards,
Peter, VK5PJ
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
