Hi Peter
Re Bill's comment about not needing Settings menu during normal operation, I
just had an instance of needing to do just that.
I was monitoring a weak station on 1296 EME working someone else, and
wanted to change MyCall temporarily to that of the station the weak station
was working to see if I could decode them (with AP or DS). Accessing
Settings, changing MyCall and then back to monitoring and freq had jumped to
first default in frequency table, needing the sked frequency to be entered
again.
73
Charlie
_____
From: Peter Sumner [mailto:[email protected]]
Sent: 16 March 2018 20:54
To: WSJT software development
Subject: Re: [wsjt-devel] Feature request: WSJT-X
Hello Bill,
for a lot of my EME contacts on 50 MHz I had been using WSJT10, which
cannot do PTT via CAT so have changed over to use WSJT-X for these contacts
now as I have recently moved the IC-7600 to use only the onboard USB
interface in the radio to reduce the complexity of the shack PC as it had
three sound cards on it and multiple serial devices. I am still trying to
find a good combination of settings to get the same decode rates as WSJT10
gave me on 50 MHz EME signals so at present there is a bit of fiddling going
on.
In the last few days have been running tests with Rex VK7MO on QRA64 on 144,
he has a birdie on the standard QRA64 freq so we have moved up a bit, in a
similar way I have been experimenting with configurations to seek the best
decodes from WSJT-X and again come across the behavior of being QSY'd back
to the standard frequency mid experiment.
It would seem my difficulty is not very common so maybe I should just stop
fiddling : -)
Regards,
Peter, vk5pj
On Sat, Mar 17, 2018 at 7:08 AM, Bill Somerville <[email protected]>
wrote:
On 16/03/2018 20:29, Peter Sumner wrote:
eg. on WSPR, 144.489 if I type into the box as you suggested (not tried that
before I must admit), my test frequency was 144.085 which moved the rig all
okay, then if I open the settings menu and close I am now set back to be on
144.489. This is the behaviour I would like to be able to temporarily
supress but still be able to use PTT via CAT.
Hi Peter,
can you explain why you need to open the settings menu mid-QSO please? This
seems to be the root of the issue you are describing.
73
Bill
G4WJS.
----------------------------------------------------------------------------
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]> et
https://lists.sourceforge.net/
<https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
