On 19/03/2018 17:11, Karza wrote:
Hi Joe, Saku & all
I have the same issue as Saku, double-clicking
on non-CQ line immediately starts TXing.
So if I see something like
"CALL1 CALL2 RRR"
and double click on that line, the program immediately
( not at start of next period )
goes to TX with message "CALL2 OH2GQC KP20"
Is this the expected bahvior?
I am running WSJT-X v1.9.0-rc3 on
Ubuntu 16.04.4 LTS
Cat is via Hamlib NET rigctl.
BR
Kari oh2gqc
Hi Karl,
this is normal behaviour. It is up to you to only double-click a decode
when you know that calling them is not going to cause QRM. The normal
use would be to tail-end a QSO rather than waiting for them to call CQ.
As with other modes you must be confident that it is either their
frequency or you are calling them offset so that you do not QRM the
other station they just worked.
The transmit is immediate because you have just decoded them on their
period and you are transmitting back to them on the other period.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
