HI George and Steve,
I had a quick look at this issue a few days ago, I have not had time to
address it fully but it is a logic error related to DXpedition mode code
that tries to truncate a file that has not been opened, that causes a
permission issue as the file location is not set correctly. This happens
when nagain is set in decoder.f90, that happens when a "freeze" decode
at the cursor frequency is invoked. I believe that normal FT8 mode
should not be on the path that accesses this file at all.
73
Bill
G4WJS.
On 01/05/2018 17:33, Steven Franke wrote:
Hi George -
Thanks for the report. I think that the problem is being caused by a
debug write statement that is being used for Fox/Hound debugging
purposes --- it will be easy to fix and we will do that before the GA
release. However, I should note that the problem is occurring because
a double-click on the waterfall invokes the “click to decode”
function, and initiates a call to the decoder with the deepest decode
settings.
If you are wanting to move the Tx and Rx frequencies, then a
command-single click should do that without calling the decoder.
Steve K9AN
On May 1, 2018, at 10:57 AM, George Molnar <[email protected]
<mailto:[email protected]>> wrote:
I’ve had this reproducible error occur a few times now. 1.90rc4
(8642) downloaded from the WSJT-X homepage crashes when
command-double clicking on the FT8 wide graph to change DF only after
at least one decode cycle has completed. I had not seen this before 8642.
OSX 10.13.5 beta, quad core i7 with 16 GB RAM.
Running: /Applications/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m
3 -e /Applications/wsjtx.app/Contents/MacOS -a
"/Users/georgemolnar/Library/Application Support/WSJT-X" -t
/var/folders/6j/2m5xrjn13s7c7k9fqv7vmp040000gn/T/WSJT-X
At line 98 of file /Users/bill/src/wsjtx-svn/lib/decoder.f90 (unit = 19)
Fortran runtime error: Cannot open file 'fort.19': Permission denied
Error termination. Backtrace:
#0 0x10d134ab6
#1 0x10d135388
#2 0x10d1359ec
#3 0x10d1b5cca
#4 0x10d1aea5d
#5 0x1050f0f30
#6 0x1050cada2
#7 0x1050ca6a7
#8 0x10513fbae
*George J Molnar*
Washington, DC, USA
KF2T - @GJMolnar
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
