Hello John and maybe others who might be interested.
a simple chinese built multi pupose interface might be you saving grace
for your Icom 7700, I use them on multiple Icom rigs, (7600, 910, 275H,
475H etc).
Look for "2018 U5 USB PC linker" on ebay (may ned to set your setting to
world wide)
These have a USB conection to your PC and use the provided 8 pin DIN lead
to plug (ACC 1) into the back of 90% of full size icoms for Audio PTT etc,
there is also a 3.5mm jack for CIV so you can control the rig via this box
too... use two 3.5mm jumper cables (supplied) to plug the audio to your PC
They are proced around $50 and work a treat in my experience.
Regards,
Peter, vk5pj
On Wed, Jul 4, 2018 at 3:20 AM, John Zantek <j...@zantek.net> wrote:
> True, but with a rig that has an Ethernet port, more hardware shouldn't be
> necessary. I know the Flex 6xxx works well with WSJT-X via the network. I
> guess we need someone to clone the code so that it uses Icom's CAT commands
> and IP ports. It's not a Fortran thing, so I don't have that talent.
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
