Would this work ? one slice, one wsjt-x .. This is for working JA's 160m
. In RIT type 68000Hz Just saying
Ed N5DG
On 10/27/2018 9:55 AM, Black Michael via wsjt-devel wrote:
Ensure you don't have the other frequency on a separate slice. That
may be confusing things.
Just put on one slice and it should behave.
de MIke W9MDB
On Saturday, October 27, 2018, 2:05:02 AM CDT, Star Light
<starlite4...@gmail.com> wrote:
Thanks for the response.
As I mentioned in my post, it doesn’t work just fine on one slice.
That’s one of the reasons I posted the question.
Does anybody have any actual knowledge about this?
Thanks, Russ
Sent from my iPhone
On Oct 25, 2018, at 9:16 PM, Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>> wrote:
I don't know why you would need separate slices to work split in
WSJT-X. Aren't slices really for different frequency ranges?
Split in WSJT-X is all inside the audio band pass of one slice. It
just adjusts the frequency so that the audio is always in the
1500-2000Hz offset.
Split is really designed for rigs (or operators) that have harmonics
on their signal (usually from incorrect audio settings).
As long as you aren't hitting the ALC on your Flex your signal would
be clean and split is not needed.
But it should work just fine on one slice.
de Mike W9MDB
On Thursday, October 25, 2018, 5:55:03 PM CDT, Star Light
<starlite4...@gmail.com <mailto:starlite4...@gmail.com>> wrote:
Hello, I have WSJT-X (v1.9.1) set up with my Yaseu FTdx9000 to
operate full (not “fake") split and it works great. WSJT-X seems to
always listen on the A side and set Tx on the B side (no matter how
it’s set initially) and moves the B side Tx freq around in a logical way.
I’m not sure how to set up the corresponding configuration on my
Flex. At present I have it set to the A slice and listening through
DAX 1 on the B slice (to be “split”). It makes odd freq adjustments
that don’t make sense on the A Tx slice, never changes Tx to the B
slice and never moves the DAX slice choice no matter how I set it
up. I don’t know what it is assuming and can’t see any way to “tell
it” it’s listening on the B slice. I don’t know if it assumes that
in setup or something else but seems to work best when set up this
way from a simply making contacts point of view.
If I set Tx and DAX audio both on the A slice (always choosing split
in config), it will actually activate the B slice from time to time
but never set’s DAX audio output from it, or Tx to it. So it can’t
actually be using the B slice for anything. Then shortly after it
activates it, it deactivates it.
Flex is a drop-down option so I know WSTJ-X “knows” about it, I just
know how it expects the physical radio to be set up to use it in
split mode. Any advice would be appreciated! Thanks, Russ KR6W
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
