Just tried RC5 - Same problem. On Tue, 27 Nov 2018 at 09:15, Ken Myers <kenmyersglo...@gmail.com> wrote:
> Hi > I have been successfully been using RSC3 then changing to RSC4 there was > no decode of waterfall content. FT8 mode. > > 2 installations - > 1 MSSurface Win10 up to date, 2 radios (FT991a & FTdx3000 both USB) - non > decode, > 2 HP Allinone with FT897/Singnalink. - non decode, > (both setups using HRD (up to date) for CAT control) > > For all: > 1.9.1 works great > 2.0 RC3 works great > 2.0 RC4 good waterfall (therefore good audio present) - NO decode. > > uninstalling/reinstalling forward and back through versions gives the same > result. > > i have concluded: > 1 I must be holding my mouth wrong - OR > 2 I have missed a new setting. > 3 When I have been looking/testing RC4, no RC4 (77 bit) transmissions. > Not sure here as I have been especially been looking top band. > > 2 probably!! > > In the words of the rich young ruler to Jesus - "What must I do to be > saved?" > > The other problem is occasionally the FT897 does not let go of transmit > after sending. > Solved by closing WSJTX. Have tried 2 soundcards, Signalink and > Rigblaster P&P, - persistent intermittent. MIGHT be my aging FT897 - > haven't ruled that out. > > Great Program Great work. > > Thanks > -- > Cheers > > Ken Myers > VK4GC > > Sunnybank Hills QLD AUS > M +61 414 487 004 > > -- Cheers Ken Myers Sunnybank Hills QLD AUS M +61 414 487 004
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
