I use Split operation = Rig with my Icom radios, which puts the radio in SPLIT mode, in which VFO A is the receive VFO, and VFO B is the transmit VFO.
Now, when changing bands, WSJT-X only changes the frequency of VFO A, leaving VFO B on the preious band, until a WSJT-X initiated transmission occurs; then VFO B is commanded to the appropriate frequency on the new band. A downside to this is that when changing bands, my automatic antenna tuner needs to adjust itself to the new band, and to do this the radio needs to transmit at a low power level. But since VFO B is the transmit VFO, and it is still on the previous band, this doesn't work. Of course there are various ways to get it to work, that involve pushing a button or two before initiating the antenna tuner sequence. But I don't see why changing bands within WSJT-X couldn't just move both VFO A and VFO B to the new band to begin with. WSJT-X v2.0.0-rc5 Windows 10 Pro x64 Build 17134 Icom IC-7300 and Icom IC-7200 Thanks, Paul K6PO
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
