It also happened to me many times. For example today three times out of four QSOs. Two times I started a QSO, but after first report no more decoding. Each time good signals around -13 dB. PC time synchronized within +- 5 ms. First I thought that it was always QRM from 75 bit signals, but more and more it seems questionable to me that this is the only reason. Will keep an eye on it. Unfortunately here in Europe there are still only a few stations using 77 bit signals, more or less only on 20 m, but band is closing early in November…
73 de Uwe, DG2YCB Von: WB5JJJ [mailto:wb5...@gmail.com] Gesendet: Mittwoch, 28. November 2018 14:18 An: wsjt-devel@lists.sourceforge.net Betreff: [wsjt-devel] Odd occurance I've noticed on RC5 that when I call CQ and a station answers, I have to send their signal report at least twice before things move along. In checking with the other station if they have JTAlert messaging on, they do have their Auto Seq on, and are sending their Rxx information as normal. I'm just not decoding it even though they show up in the WF more or less the same signal display as when they responded to my CQ and no obvious QRM. This happens with all signals levels. This does not happen for all responses, but enough that it got me wondering. -- George Cotton, WB5JJJ
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
