Hi Bill The box isn’t checked: [cid:[email protected]] I can reproduce this by any start of wsjtx.
But I now found the problem I think. When I start WSJTX, it turns the transceiver into LSB mode, and there are not ft8 signals down there 😊 After selecting a frequency it stays in USB mode correctly. I am using Kenwood TS2000 with CAT over RS232 cable. It worked great in the last versions. Maybe there was a change in Hamlib? There are my CAT settings: [cid:[email protected]] Any idea what this causes? 73 Attila Von: Bill Somerville <[email protected]> Gesendet: Donnerstag, 13. Dezember 2018 02:26 An: [email protected] Betreff: Re: [wsjt-devel] 2 Bugs or maybe features? Hi Attila, comments below. On 12/12/2018 20:24, Attila Kocis wrote: Hi I'm using 2.0 GA (on Win10 1803 64bit) now the third day and it works great, except of two problems which don't want to go away. The first is, the SSL/LOTW error message won't disappear, also not after installing the SSL Tool which is mentioned in the manual. It still appears on every start. Please refer to the Windows installation instructions in the User Guide<https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.0.0_de.pdf> particularly the part about what to do if installing the OpenSSL libraries does not fix the issue. The second is, when I start WSJTX, the waterfall is always empty. No signal can be seen there and nothing is decoding. The signals are shown only when I select first a frequency in the dropdown menu or go to settings menu and back to WSJTX. Then the signals are showing and decoding. This wasn't happening in any beta RC version. Do you have the option "Settings->General->Monitor off at startup" checked? That would stop receiving until you clicked "Monitor" or selected a working frequency. It is intended to allow you to start WSJT-X without disturbing the rig. 73 de dl1nux Attila 73 Bill G4WJS.
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
