I also see this infrequently with my Flex 6600 (v2.4.9) & Win 10 (1803) connected via CAT/DAX. Can’t correlate it with anything. I usually let the cycle pass and it works fine on the next one.
> On Dec 14, 2018, at 3:58 PM, Morris Wideman via wsjt-devel > <[email protected]> wrote: > > Same here and I have had this happen many times when preselecting (setting up > to call a wanted station) on a split and then TX but no audio so it not > necessarily a instant change that triggers this. I have two sounds cards > built in and add on and it does this with either as source. Both with cable > connected audio. > > WA4MIT Morris > > On Friday, December 14, 2018, 4:29:47 PM CST, Bill <[email protected]> > wrote: > > > I have also reported this problem several times but have never received any > responses as to why this is happening. This is not windows specific since it > happens to me on both Mac and PC. It also isn't related to version number > since it happens with the older 1.9.1 and newer 2.0 versions. It happens to > me with a radio (FT991A) with a built in sound card and also a radio > (FT1000MP) using an external MicroHamUSB III interface. The only thing that > seems to apply is that it usually happens when I change my transmit frequency > slot. The transmitter keys but no audio. This is fixed by immediately hitting > halt tx then going back to enable. This isn't a very common occurrence but it > does happen to me at least several time a week, of course especially when I > am trying to work a new dx! > > 73 > > Bill - AK6A > > On Fri, Dec 14, 2018 at 2:01 PM Morris Wideman via wsjt-devel > <[email protected]> wrote: > I agree this phenomenon has been with me for a long time now, stopping TX and > restarting resumes the audio. No one has provided a reason or fix. It does > not seem to follow any particular pattern that I have been able to pin down. > 73 Morris WA4MIT > > On Friday, December 14, 2018, 2:20:19 PM CST, Al Pawlowski <[email protected]> > wrote: > > > The occasional “no audio” on Tx has been around since I started using WSJT-X > a couple of years ago. Usually, just disabling Tx and reenabling fixes the > problem until next time - it has been so seldom for me that I have just > ignored it. I use an ANAN-100B with OpenSDRmrx now. However, I think this > happened when I was using a USB Signal Link and Icom 745. > > Closing WSJT-X also recovers normal Tx. However, it does take some seconds > for all of WSJT’s tasks to stop after the window closes. OpenSDRmrx also > takes several seconds after its window closes to completely shutdown. Seems > like a Windows thing. I am using Windows 10 Home now on a 2.4GHz I5, but it > was the same on Windows 7pro and Windows 10pro on a 3.2GHz I3. > > Al Pawlowski, K6AVP > Los Osos, CA USA > >> Date: Fri, 14 Dec 2018 18:28:58 +0000 > >> From: David Fisher <[email protected]> >> To: WSJT software development <[email protected]> >> Subject: Re: [wsjt-devel] TX function lost, then have Task Manager >> problem >> >> I run a FLEX 6600 and I see it too. This problem has been around for a >> while; it is not due to the WSJT protocol change. Since the transmitter >> engages we know that the transmit command is getting through the CAT system >> to the radio. I?m not aware of any evidence of a problem like this >> occurring in other modes, SSB for instance. That suggests that DAX is not >> getting the signal through to the radio. It would be interesting to learn >> if RTTY and PSK users ever see an error like this. I?ve never heard of one. >> >> If all of that is true (we?re guessing now) then the WSJT/DAX channel >> interface looks suspicious. Like Al, I?ve seen the stuck WSJT and have had >> to kill them off by hand. I haven?t noticed the CPU spinning, but I haven?t >> looked for it. >> >> Dave / NX6D > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
