Ok...I see what you mean. click moves Rx, ctl-click moves both, shift click moves Tx. I knew something moved them both...and sometimes I hit control instead of shift in the heat of he moment.
Do you have any theories on why a station gets covered by another station on exactly the same frequuency +/- 1-2 Hz? That should be very unlikely, but I seem to lose contacts to that too often to be coincidence. Getting clobbered by someone 10 Hz off seems like bad luck, but exact same Hz or 1 Hz off happens too often. Maybe some operators who believe in Tx on Rx use ctl-click??? thanks, jeff, wa1hco On Sat, Apr 20, 2019 at 2:05 AM Paul Kube <paul.k...@gmail.com> wrote: > Jeff, > > >> What I think is happening is that people click on signals so they can see >> them in the Rx Frequency window. They have not checked the Hold Tx >> Frequency and so the transmitter frequency is automatically following the >> Rx frequency. >> > > Are you talking about single-clicking in the waterfall? That only moves > the Rx frequency, whether or not Hold Tx Freq is checked. > > 73, Paul K6PO > > >> On Thu, Apr 18, 2019 at 4:41 PM James Shaver <kd2...@gmail.com> wrote: >> >>> And speaking of S/N, I just realized this is the “devel” reflector and >>> not the generic WSJT Group reflector. This really isn’t a topic suitable >>> for the development side, to be honest... >>> >>> 73, >>> >>> Jim S. >>> N2ADV (ex KD2BIP) >>> >>> > On Apr 18, 2019, at 4:34 PM, James Shaver <kd2...@gmail.com> wrote: >>> > >>> > It never ceases to amaze me how so many hams instantly jump to the >>> conclusion that what they witness on the air is automatically attributed to >>> intentional “rudeness” or ill intent. >>> > >>> > His s/n is not really relevant - it’s very possible that even if >>> propagation was, to coin a phrase, putting this person in your lap, that >>> does not mean you’re even a weak trace on his/her end. That person may have >>> a very high local noise floor due to an indoor antenna or a lot of noisy >>> consumer electronics around them or it could even be as simple as plain old >>> propagation differences or it could be someone who has just jumped into >>> digital modes for the very first time and is not yet familiar with the >>> interface. >>> > >>> > If it bothers you that much, look up their email on QRZ and send them >>> a screen shot and *politely* ask if they even heard/saw you. If they >>> didn’t, offer to help them track down local noise generators or help them >>> optimize their receive setup. >>> > >>> > It pays to give people the benefit of the doubt. If they turn out to >>> be a jerk, then you can at least walk away with the satisfaction that you >>> tried your best to be an “Elmer” and are, at the end of the day, the better >>> person. >>> > >>> > And relax. It’s just ham radio. Nobody died on the table. This is >>> supposed to be fun. >>> > >>> > Jim S. >>> > N2ADV >>> > >>> > _______________________________________________ >>> > wsjt-devel mailing list >>> > wsjt-devel@lists.sourceforge.net >>> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
