OK .. then I was not seeing things.   It happened to me twice, but then
stopped occurring.    At least I know I'm not the only one.

Neil, KN3ILZ

On 4/30/2019 10:30 PM, Matthew Miller wrote:
I just experienced this behavior playing around tonight, I noticed I got stuck in message 
2 during a qso and when I hit "Halt TX" it switched off my transmitter but did 
not clear EnableTX button.  Then a few moments later my transmitter keyed as it began the 
next scheduled TX cycle.

I just tried to reproduce (Linux) and I can reproduce it starting up the 
application, enable TX, let it start calling CQ and part way thru hit Halt TX 
while it is transmitting.  The transmitter shuts down but it resumes the next 
scheduled slot.
Also I notice if its not transmitting but is during a "slot" when it should be, 
if I press halt my transmitter seems to quickly key up then un-key immediately.
If I press Halt TX during a slot when I am not supposed to be transmitting, 
nothing happens.

I'm using an ICOM 7100 with CAT control if that makes any difference for the 
PTT selection.

-Matt / KK4NDE

-----Original Message-----
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Tuesday, April 30, 2019 12:00 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Halt Tx Button

On 30/04/2019 02:10, Neil Zampella wrote:
Hi all,

trying to stop a Tx by clicking the Halt Tx button, it stopped the
rig, but did NOT reset the Enable Tx, and actually caused a couple of
entries in the RxFrequency window when I clicked it twice.

Tested it under FT8 mode, and it works normally there. V2.1.0-RC5 64 bit.

Neil, KN3ILZ
Hi Neil,

thanks for the issue report. I am unable to reproduce this, if you can come up 
with a recipe for reproduction that would be most helpful.

73
Bill
G4WJS.



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


---
This email has been checked for viruses by AVG.
https://www.avg.com



_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to