Both LINE IN and LINE OUT were previously set to mono and the program worked fine. Changing to RIGHT channel made no difference in the decoding, i.e. still a blank waterfall. I'm not sure whether the soundcard is dead or the K3 output is dead.
Ed On Thu, May 9, 2019 at 4:52 PM Bill Somerville <[email protected]> wrote: > On 09/05/2019 16:57, Ed Deichler wrote: > > Bill, > > > > Yes. The K3 has respective jacks for line in and line out. According > > to the manual, the K3 has two settings for the audio output. NORMAL > > is usually used for digital modes and a separate PHONES setting allows > > the audio to match headphones and be controlled by the AF/SUB gain > > controls. Either choice makes no difference. > > > > 73 de Ed > > Hi Ed, > > the NOR option also has a level, default is 10. Also make sure you have > the right stereo channel (i.e. left for MAIN Rx) selected in the WSJT-X > "Settings->Audio" panel. > > 73 > Bill > G4WJS. > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
