Ed,
Pardon – I responded to the wrong email. I have a friend having the same problem and responded to your email rather than his. Sorry for the misunderstanding. TNX, Phil Phil Stephenson K0PWS Saint Louis, MO US 636-675-1379 [email protected] From: Ed Deichler <[email protected]> Reply-To: WSJT software development <[email protected]> Date: Thursday, May 9, 2019 at 4:58 PM To: WSJT software development <[email protected]> Subject: Re: [wsjt-devel] No Longer Decoding Both LINE IN and LINE OUT were previously set to mono and the program worked fine. Changing to RIGHT channel made no difference in the decoding, i.e. still a blank waterfall. I'm not sure whether the soundcard is dead or the K3 output is dead. Ed On Thu, May 9, 2019 at 4:52 PM Bill Somerville <[email protected]> wrote: On 09/05/2019 16:57, Ed Deichler wrote: > Bill, > > Yes. The K3 has respective jacks for line in and line out. According > to the manual, the K3 has two settings for the audio output. NORMAL > is usually used for digital modes and a separate PHONES setting allows > the audio to match headphones and be controlled by the AF/SUB gain > controls. Either choice makes no difference. > > 73 de Ed Hi Ed, the NOR option also has a level, default is 10. Also make sure you have the right stereo channel (i.e. left for MAIN Rx) selected in the WSJT-X "Settings->Audio" panel. 73 Bill G4WJS. _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
