Yesterday, no problems at all. First thing this morning WSJT is giving
me messages that there are audio sound input problems. I spent a LONG
time researching this and ultimately found that the microphone is not
being recognized. I've been to the Windows microphone privacy
permissions page and ensured that the proper permissions were in place.
I've turned the permissions off then off, then rebooted with no luck.
The permission page also told me that the last connection to the
microphone was yesterday by WSJT-X.
Later: I've also discovered that DXLab Commander is not having any
problem hearing signals and is reading signals on its S-meter. WSJT-X
is OK on transmit, but the S-meter is flat and the program is not
copying anything. I've uninstalled and installed both WSJT-X and the
audio drivers 1.30 but the problem remains the same. I am using an
IC-7610 and have an IC-7300 as a backup Xcvr. I just substituted the
7300 for the 7610 and found the problem is exactly the same. The clock
is dead on accurate.
I'm stumped - what do I need to do to get WSJT-X to recognize the
microphone audio input?
Thanks & 73,
Bill - AA4M
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
