I'm getting closer. I have no idea how I did it, but the S-meter is now
showing full scale and bright red (clipping). I'm getting light copy
out of a crowded band, which I guess is a step in the right direction,
but how do I get the receive gain down to a respectable level?
Thanks, Bill AA4M
On 11/13/2019 13:53:19, Bill Mullin wrote:
Yesterday, no problems at all. First thing this morning WSJT is
giving me messages that there are audio sound input problems. I spent
a LONG time researching this and ultimately found that the microphone
is not being recognized. I've been to the Windows microphone privacy
permissions page and ensured that the proper permissions were in
place. I've turned the permissions off then off, then rebooted with
no luck. The permission page also told me that the last connection to
the microphone was yesterday by WSJT-X.
Later: I've also discovered that DXLab Commander is not having any
problem hearing signals and is reading signals on its S-meter. WSJT-X
is OK on transmit, but the S-meter is flat and the program is not
copying anything. I've uninstalled and installed both WSJT-X and the
audio drivers 1.30 but the problem remains the same. I am using an
IC-7610 and have an IC-7300 as a backup Xcvr. I just substituted the
7300 for the 7610 and found the problem is exactly the same. The
clock is dead on accurate.
I'm stumped - what do I need to do to get WSJT-X to recognize the
microphone audio input?
Thanks & 73,
Bill - AA4M
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
